A DFM engineering review is the cheapest insurance in manufacturing: our engineers analyze your CAD for wall thickness, tolerance conflicts and material risks within 24 hours — free with every quote.
How It Works
1. Upload CAD
Send us your STEP, IGES, or native CAD file. We accept all major formats.
2. Engineering Review
Our engineers analyze your design within 24 hours. You get a written report.
3. Feedback Call
We walk you through every finding. No jargon — just clear recommendations.
4. Quote & Proceed
Approve the optimized design, get your quote, and we start production.
Free DFM Review with Every Quote
No obligation. No pressure. Just an honest engineering assessment of your design — because the best partnerships start with transparency.
We Engineer Before We Manufacture
Most shops take your CAD and start cutting. We take your CAD and start thinking. Our DFM review catches issues before they become expensive mistakes.
What We Check
Tolerance Analysis
We check every critical dimension against your specified tolerances. If 5-axis CNC can hold ±0.005mm but your design asks ±0.001mm on a non-critical surface, we will tell you — before it drives up your cost.
Material Advisory
Your design specifies a material — but is it the right one? We have seen aluminum 6061 work where 7075 was specified, saving cost with zero performance tradeoff.
Surface Finish
Anodizing, bead blasting, powder coating — each finish has limits. We verify your requested finish is compatible with your geometry before we commit.
Assembly & Fit
Multi-part assemblies are where most shops fail. We check inter-part clearances, thread engagements, and press-fit conditions before cutting metal.
Cost Optimization
Deep pockets, thin walls, blind holes drive up machining time. We flag geometry that adds cost without function. Clients save 15-30% after DFM suggestions.
What We Check
Tolerance Analysis
We check every critical dimension against your specified tolerances. If 5-axis CNC can hold ±0.005mm but your design asks ±0.001mm on a non-critical surface, we will tell you — before it drives up your cost.
Material Advisory
Your design specifies a material — but is it the right one? We have seen aluminum 6061 work where 7075 was specified, saving cost with zero performance tradeoff.
Surface Finish
Anodizing, bead blasting, powder coating — each finish has limits. We verify your requested finish is compatible with your geometry before we commit.
Assembly & Fit
Multi-part assemblies are where most shops fail. We check inter-part clearances, thread engagements, and press-fit conditions before cutting metal.
Cost Optimization
Deep pockets, thin walls, blind holes drive up machining time. We flag geometry that adds cost without function. Clients save 15-30% after DFM suggestions.